ske087
576f22268f
Card reading (rdm6300 + pyserial) printing card inserted/removed with the full card data, plus a --serve mode that publishes taps over HTTP so a web page can authenticate a tap. The bridge reports card ids only - mapping a card to a user stays on the server. The tap is latched for --tap-ttl seconds, including after the card is lifted, and is single use, so a page reload cannot replay one tap into two logins. Port selection identifies the reader by serial number or by-id path instead of /dev/ttyUSBn, and refuses to guess when a selector matches several adapters. deploy/ has the systemd unit, a udev rule for a stable /dev/rdm-reader, and install.sh. Covered by unit tests plus PTY end-to-end tests.
163 lines
5.9 KiB
Bash
Executable File
163 lines
5.9 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Install the RDM card reader as a service that starts at boot and keeps the
|
|
# card on the reader available over HTTP for the web page to claim.
|
|
#
|
|
# Run as root on the Raspberry Pi:
|
|
#
|
|
# sudo ./deploy/install.sh --origin https://your.web.app
|
|
#
|
|
# Options:
|
|
# --origin URL web app origin allowed to read the API (repeatable)
|
|
# --port PORT HTTP port for the bridge (default 8765)
|
|
# --dir PATH install location (default /opt/rdm-card-reader)
|
|
# --user NAME service account (default rdmcard)
|
|
# --no-service install and configure, but do not enable the service
|
|
#
|
|
set -euo pipefail
|
|
|
|
ORIGINS=()
|
|
BRIDGE_PORT=8765
|
|
INSTALL_DIR=/opt/rdm-card-reader
|
|
SERVICE_USER=rdmcard
|
|
INSTALL_SERVICE=1
|
|
SOURCE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
|
|
|
|
while [[ $# -gt 0 ]]; do
|
|
case "$1" in
|
|
--origin) ORIGINS+=("$2"); shift 2 ;;
|
|
--port) BRIDGE_PORT="$2"; shift 2 ;;
|
|
--dir) INSTALL_DIR="$2"; shift 2 ;;
|
|
--user) SERVICE_USER="$2"; shift 2 ;;
|
|
--no-service) INSTALL_SERVICE=0; shift ;;
|
|
-h|--help) sed -n '2,20p' "$0"; exit 0 ;;
|
|
*) echo "unknown option: $1" >&2; exit 2 ;;
|
|
esac
|
|
done
|
|
|
|
log() { printf '\n\033[1m==> %s\033[0m\n' "$*"; }
|
|
warn() { printf '\033[33mwarning: %s\033[0m\n' "$*" >&2; }
|
|
|
|
if [[ $EUID -ne 0 ]]; then
|
|
echo "Please run as root: sudo $0 $*" >&2
|
|
exit 1
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# 1. System packages
|
|
# ---------------------------------------------------------------------------
|
|
log "Checking system packages"
|
|
apt-get update -qq
|
|
apt-get install -y --no-install-recommends python3 python3-venv python3-pip
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# 2. Install the application
|
|
# ---------------------------------------------------------------------------
|
|
log "Installing to $INSTALL_DIR"
|
|
mkdir -p "$INSTALL_DIR"
|
|
|
|
# Copy the source tree (excluding local build/test artifacts).
|
|
for item in src tests pyproject.toml README.md LICENSE deploy; do
|
|
if [[ -e "$SOURCE_DIR/$item" ]]; then
|
|
cp -a "$SOURCE_DIR/$item" "$INSTALL_DIR/"
|
|
fi
|
|
done
|
|
|
|
log "Building the virtual environment"
|
|
python3 -m venv "$INSTALL_DIR/.venv"
|
|
"$INSTALL_DIR/.venv/bin/pip" install --quiet --upgrade pip
|
|
"$INSTALL_DIR/.venv/bin/pip" install --quiet "$INSTALL_DIR"
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# 3. Service account
|
|
# ---------------------------------------------------------------------------
|
|
log "Creating service account '$SERVICE_USER'"
|
|
if ! id -u "$SERVICE_USER" >/dev/null 2>&1; then
|
|
# No login shell, no home directory: this account only reads a serial port.
|
|
useradd --system --no-create-home --shell /usr/sbin/nologin "$SERVICE_USER"
|
|
fi
|
|
|
|
# Serial access requires the dialout group.
|
|
usermod -aG dialout "$SERVICE_USER"
|
|
echo " $SERVICE_USER is in group dialout"
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# 4. Stable device name
|
|
# ---------------------------------------------------------------------------
|
|
log "Installing the udev rule (/dev/rdm-reader)"
|
|
install -m 0644 "$SOURCE_DIR/deploy/99-rdm-reader.rules" \
|
|
/etc/udev/rules.d/99-rdm-reader.rules
|
|
udevadm control --reload-rules
|
|
udevadm trigger --subsystem-match=tty || true
|
|
sleep 1
|
|
|
|
if [[ -e /dev/rdm-reader ]]; then
|
|
echo " /dev/rdm-reader -> $(readlink -f /dev/rdm-reader)"
|
|
else
|
|
warn "/dev/rdm-reader does not exist yet."
|
|
warn "The reader may not be plugged in, or it uses a different chip."
|
|
warn "Run '$INSTALL_DIR/.venv/bin/rdm-card-reader --list-ports --verbose-ports'"
|
|
warn "then edit /etc/udev/rules.d/99-rdm-reader.rules to match your adapter."
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# 5. Service
|
|
# ---------------------------------------------------------------------------
|
|
log "Installing the systemd unit"
|
|
UNIT=/etc/systemd/system/rdm-card-reader.service
|
|
install -m 0644 "$SOURCE_DIR/deploy/rdm-card-reader.service" "$UNIT"
|
|
|
|
# Rewrite the ExecStart line with the real install dir, port and origins.
|
|
ORIGIN_ARGS=""
|
|
for origin in "${ORIGINS[@]:-}"; do
|
|
[[ -n "$origin" ]] && ORIGIN_ARGS+=" --allow-origin $origin"
|
|
done
|
|
|
|
python3 - "$UNIT" "$INSTALL_DIR" "$BRIDGE_PORT" "$ORIGIN_ARGS" "$SERVICE_USER" <<'PY'
|
|
import re, sys
|
|
unit, install_dir, port, origin_args, user = sys.argv[1:6]
|
|
text = open(unit).read()
|
|
|
|
command = (
|
|
f"{install_dir}/.venv/bin/rdm-card-reader --serve "
|
|
f"--port /dev/rdm-reader --bridge-port {port} --mode login{origin_args}"
|
|
)
|
|
# Replace the whole (possibly line-continued) ExecStart definition.
|
|
text = re.sub(r"ExecStart=[\s\S]*?(?=\n\n|\nRestart=)", f"ExecStart={command}", text, count=1)
|
|
text = re.sub(r"^User=.*$", f"User={user}", text, count=1, flags=re.M)
|
|
open(unit, "w").write(text)
|
|
PY
|
|
|
|
# Make the venv readable by the service account.
|
|
chown -R "$SERVICE_USER:$SERVICE_USER" "$INSTALL_DIR"
|
|
|
|
if [[ "$INSTALL_SERVICE" -eq 1 ]]; then
|
|
log "Enabling and starting the service"
|
|
systemctl daemon-reload
|
|
systemctl enable rdm-card-reader.service
|
|
systemctl restart rdm-card-reader.service
|
|
sleep 2
|
|
systemctl --no-pager --lines=15 status rdm-card-reader.service || true
|
|
else
|
|
log "Skipping service start (--no-service)"
|
|
fi
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# Done
|
|
# ---------------------------------------------------------------------------
|
|
cat <<EOF
|
|
|
|
$(log "Installed")
|
|
|
|
Bridge : http://127.0.0.1:$BRIDGE_PORT
|
|
Card state : curl http://127.0.0.1:$BRIDGE_PORT/api/card
|
|
Health : curl http://127.0.0.1:$BRIDGE_PORT/api/health
|
|
Logs : journalctl -u rdm-card-reader -f
|
|
Test a tap : place a card and run the curl above
|
|
|
|
The service starts automatically on boot. The card stays readable at
|
|
/api/card while it is on the reader; POST /api/card/claim hands it over
|
|
once, so a page reload cannot replay the same tap into a second login.
|
|
|
|
EOF
|