# Info-Beamer OS WiFi Configuration

## Quick Setup (Recommended):

1. After flashing SD card with Info-Beamer OS:
   - Don't eject SD card yet
   - Open the SD card in file explorer
   - Create new file: wpa_supplicant.conf
   - Add this content:

country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="YOUR_WIFI_NAME"
    psk="YOUR_WIFI_PASSWORD"
    key_mgmt=WPA-PSK
}

2. Replace YOUR_WIFI_NAME and YOUR_WIFI_PASSWORD
3. Save file and eject SD card
4. Insert in Pi and boot

## Alternative: Pi Imager Method
- Use gear icon in Pi Imager
- Enable "Configure wireless LAN"
- Enter WiFi credentials before flashing

## Country Codes:
US, GB, DE, FR, IT, ES, CA, AU, etc.

## Important:
- Country code is REQUIRED
- File goes in /boot partition
- Use quotes around SSID/password