83 lines
3.9 KiB
C++
83 lines
3.9 KiB
C++
/*
|
|
Please read README.md file in this folder, or on the web:
|
|
https://github.com/espressif/arduino-esp32/tree/master/libraries/WiFiProv/examples/WiFiProv
|
|
|
|
Note: This sketch takes up a lot of space for the app and may not be able to flash with default setting on some chips.
|
|
If you see Error like this: "Sketch too big"
|
|
In Arduino IDE go to: Tools > Partition scheme > chose anything that has more than 1.4MB APP
|
|
- for example "No OTA (2MB APP/2MB SPIFFS)"
|
|
*/
|
|
|
|
#include "sdkconfig.h"
|
|
#if CONFIG_ESP_WIFI_REMOTE_ENABLED
|
|
#error "WiFiProv is only supported in SoCs with native Wi-Fi support"
|
|
#endif
|
|
|
|
#include "WiFiProv.h"
|
|
#include "WiFi.h"
|
|
|
|
// #define USE_SOFT_AP // Uncomment if you want to enforce using the Soft AP method instead of BLE
|
|
const char *pop = "abcd1234"; // Proof of possession - otherwise called a PIN - string provided by the device, entered by the user in the phone app
|
|
const char *service_name = "PROV_123"; // Name of your device (the Espressif apps expects by default device name starting with "Prov_")
|
|
const char *service_key = NULL; // Password used for SofAP method (NULL = no password needed)
|
|
bool reset_provisioned = true; // When true the library will automatically delete previously provisioned data.
|
|
|
|
// WARNING: SysProvEvent is called from a separate FreeRTOS task (thread)!
|
|
void SysProvEvent(arduino_event_t *sys_event) {
|
|
switch (sys_event->event_id) {
|
|
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
|
|
Serial.print("\nConnected IP address : ");
|
|
Serial.println(IPAddress(sys_event->event_info.got_ip.ip_info.ip.addr));
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED: Serial.println("\nDisconnected. Connecting to the AP again... "); break;
|
|
case ARDUINO_EVENT_PROV_START: Serial.println("\nProvisioning started\nGive Credentials of your access point using smartphone app"); break;
|
|
case ARDUINO_EVENT_PROV_CRED_RECV:
|
|
{
|
|
Serial.println("\nReceived Wi-Fi credentials");
|
|
Serial.print("\tSSID : ");
|
|
Serial.println((const char *)sys_event->event_info.prov_cred_recv.ssid);
|
|
Serial.print("\tPassword : ");
|
|
Serial.println((char const *)sys_event->event_info.prov_cred_recv.password);
|
|
break;
|
|
}
|
|
case ARDUINO_EVENT_PROV_CRED_FAIL:
|
|
{
|
|
Serial.println("\nProvisioning failed!\nPlease reset to factory and retry provisioning\n");
|
|
if (sys_event->event_info.prov_fail_reason == NETWORK_PROV_WIFI_STA_AUTH_ERROR) {
|
|
Serial.println("\nWi-Fi AP password incorrect");
|
|
} else {
|
|
Serial.println("\nWi-Fi AP not found....Add API \" nvs_flash_erase() \" before beginProvision()");
|
|
}
|
|
break;
|
|
}
|
|
case ARDUINO_EVENT_PROV_CRED_SUCCESS: Serial.println("\nProvisioning Successful"); break;
|
|
case ARDUINO_EVENT_PROV_END: Serial.println("\nProvisioning Ends"); break;
|
|
default: break;
|
|
}
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
WiFi.begin(); // no SSID/PWD - get it from the Provisioning APP or from NVS (last successful connection)
|
|
WiFi.onEvent(SysProvEvent);
|
|
|
|
// BLE Provisioning using the ESP SoftAP Prov works fine for any BLE SoC, including ESP32, ESP32S3 and ESP32C3.
|
|
#if CONFIG_BLUEDROID_ENABLED && !defined(USE_SOFT_AP)
|
|
Serial.println("Begin Provisioning using BLE");
|
|
// Sample uuid that user can pass during provisioning using BLE
|
|
uint8_t uuid[16] = {0xb4, 0xdf, 0x5a, 0x1c, 0x3f, 0x6b, 0xf4, 0xbf, 0xea, 0x4a, 0x82, 0x03, 0x04, 0x90, 0x1a, 0x02};
|
|
WiFiProv.beginProvision(
|
|
NETWORK_PROV_SCHEME_BLE, NETWORK_PROV_SCHEME_HANDLER_FREE_BLE, NETWORK_PROV_SECURITY_1, pop, service_name, service_key, uuid, reset_provisioned
|
|
);
|
|
log_d("ble qr");
|
|
WiFiProv.printQR(service_name, pop, "ble");
|
|
#else
|
|
Serial.println("Begin Provisioning using Soft AP");
|
|
WiFiProv.beginProvision(NETWORK_PROV_SCHEME_SOFTAP, NETWORK_PROV_SCHEME_HANDLER_NONE, NETWORK_PROV_SECURITY_1, pop, service_name, service_key);
|
|
log_d("wifi qr");
|
|
WiFiProv.printQR(service_name, pop, "softap");
|
|
#endif
|
|
}
|
|
|
|
void loop() {}
|