wifi with relays

test_but/test_but.ino

@@ -0,0 +1,24 @@
+const int buttonPin = 0; // Assuming BUT1 is connected to GPIO 0
+const int ledPin = 8;    // Assuming the user LED is connected to GPIO 8
+//test1
+void setup() {
+  Serial.begin(115200);
+  Serial.println("Setup started");
+  pinMode(buttonPin, INPUT_PULLUP); // Set the button pin as input with an internal pull-up resistor
+  pinMode(ledPin, OUTPUT);          // Set the LED pin as output
+  Serial.println("Setup completed");
+}
+
+void loop() {
+  int buttonState = digitalRead(buttonPin); // Read the state of the button
+
+  if (buttonState == LOW) {
+    Serial.println("Button is pressed");
+    digitalWrite(ledPin, HIGH); // Turn on the LED
+  } else {
+    Serial.println("Button is not pressed");
+    digitalWrite(ledPin, LOW);  // Turn off the LED
+  }
+
+  delay(2000); // Add a 2-second delay between readings
+}